What Does the Rework of the Wiring Harness Include?

In the production process of Wire Harness, quality exists in all links. Therefore, by checking the pass rate of the products and doing a good job in full inspection, we can ensure that the developed goods meet customer requirements and customer satisfaction, but wire harness production cannot be avoided during this period. In the process, there will be non-conforming products, which need to be reworked internally to achieve the products that meet the requirements. Among them, the most common problems are the damage of the Wiring Harness dislocation Connector or the leakage of copper wire from the bad wire, the wrong use of the bare missing wire, and the poor dislocation of the rubber and the poor crimping.
1. Dislocation
There are many types of terminals and different shapes. Even if the connectors of the same type of terminals are different, it will also lead to the need for development and different rework tools. Because the PIN position of the wire is not threaded correctly, it will cause misplacement.
2. The connector is damaged or defective
In the production process, if there are some bad ones, they should stick a red label and put them in the bad magenta box. If there is a batch problem, they should be returned to the supplier for screening. First, select a good batch from the warehouse and use it first, and rework the connector in good condition. No obvious scratches, can be locked normally.
Kable-X is committed to the production of Medical Cable Assembly, communication wiring harness, Industrial Cable Assembly and new energy wiring harness. Similar to ventilator wiring harness and scalpel wiring harness, waterproof wiring harness and laser equipment wiring harness, we all do more. In the future, Kable-X will also bring satisfactory customized wiring harness to more customers with its professional wiring harness experience. Rework is only a remedy after a problem occurs. What we need to do is to improve and optimize daily to ensure that good quality is made, not cut out, so as to improve customer satisfaction, increase food share, and reduce defects. The ultimate goal of reducing risk and cost and improving products and services, thereby accelerating improvement and enabling the organization to achieve sustained success.