Electric Vehicle Wiring Harness

The Electric Vehicle Wiring Harness is the blood vessel of the electric bicycle. Through this blood vessel, the power of the battery is output to the motor, control system, lighting signal system, and auxiliary system to drive and control the vehicle. The carrier of this blood vessel is the electric vehicle Wiring Harness. Electric Vehicle Wiring Harnesses are divided into main wiring harnesses and branch wiring harnesses, which should be classified according to the system configuration of electric vehicles. The main wiring harness is divided into battery power supply system wiring harness, power switch wiring harness, control system main supply wiring harness; branch wiring harness is divided into lighting signal wiring harness, control system signal wiring harness, combination switch wiring harness, etc. The wiring harness of the lighting signal system can be divided into headlights, front turn signals, rear lights, rear turn signals, brake lights, license plate light harnesses, etc. Plastic connectors are generally used between the wiring harness and the wiring harness and between the wiring harness and the electronic components. Generally, manufacturers use different numbers of holes in connectors to distinguish them. Most of the main circuit harnesses of the whole vehicle are centered on the controller and extend to the front and rear of the vehicle body respectively.

As the main carrier of power output on electric vehicles, FAKRA Wiring Harness is one of the key components for the performance and safety of the entire vehicle. The requirements of electric vehicle high-voltage wiring harnesses, voltage, current, temperature, and working life , Shielding effect, flexibility, bending resistance, identification, etc. All of them are indispensable. Its wires, terminals, connectors, and other raw materials must meet environmental standards for use in order to ensure the safety of electric vehicles. 
Kable-X has more than 20 years of experience With experience in the Cable Assembly, the quality of Kable-X electronic wiring harness has passed ISO9001, IATF16949, IPC620C and other certifications, and the products are exported to Japan, South Korea, the United States and other countries. Provide customers with one-stop service for automotive high-voltage wiring harness customization.
Therefore, our Vehicle Cable Assembly is recognized by our customers, and we can meet customer needs. Especially our Agricultural Machinery Navigation Wire Harness and Vehicle Air Conditioner Wire Harness.