What Are the Effects of the Quality of Raw Materials on Medical Electronic Wiring Harness

Medical electronic Wiring Harness is generally composed of wires, insulating sheaths, wiring harness terminals and wrapping materials.
The quality of Medical Cable Assembly raw materials will have a great impact on the insulation performance of the insulator. Therefore, the selection of raw materials for medical electronic wire harnesses will be very important, and the quality of Wire Harness materials cannot be changed blindly by reducing the cost of wire harnesses. In order to prevent the quality problems of wire harness raw materials, we should carefully check and inspect important information such as batch numbers and material certificates for each batch of incoming materials, and do a good job of traceability data for the use of materials.
The copper used in the terminal material of the medical wiring harness is mainly brass and bronze, of which brass accounts for a large proportion. In addition, different coatings can be selected according to different needs. The commonly used materials for the sheath are PA6, PA66, ABS, PBT, pp, etc. According to the actual situation, flame retardant or reinforcing materials can be added to the plastic to achieve the purpose of reinforcement or flame retardant, such as adding glass fiber reinforcement.
According to the different use environment, select the corresponding wire material. At present, some medical wiring harness manufacturers test the electrical properties after assembling them into finished products. As a result, because the insulation resistance of the insulator itself is unqualified, the whole batch of finished products has to be scrapped. A reasonable process should be 100% process screening in the state of the insulator parts to ensure that the electrical properties are qualified.
Wire harness wrapping plays the role of wear resistance, flame retardant, anti-corrosion, preventing interference, reducing noise, and beautifying the appearance. Generally, the wrapping material is selected according to the working environment and space size. In the choice of dressing materials, there are usually tapes, corrugated pipes, PVC pipes, etc.
Kable-X mainly produces and processes communication wire harness, disposable medical Cable Assembly, Industrial Cable Assembly and automotive wiring harness. We have our own wire harness factory and wire harness testing laboratory, and over the years in the wire harness industry, we have accumulated a lot of wire harness raw material procurement channels, and have the ability to provide customers with one-stop solutions for Connector. The most important thing is that we have more than 20 experienced wiring harness engineers, whether it is waterproof wiring harness, robot wiring harness or Drone Wiring Harness, we are confident to make customers satisfied.