Water Sensor Wiring Harness

KABLE-X Technology(Suzhou)Co., Ltd has been focusing on the production of custom wiring harnesses for more than 20 years, and is very strict in every process of Wiring Harness processing. The business area is also very broad, including Medical Defibrillator Wire Harness and health equipment Wire Harness in the medical field, industrial wiring harnesses in the industrial field, and Agricultural Machinery Navigation Wire Harness in the agricultural field.
The water sensor line book is mostly used in European wooden buildings. When the water source is immersed, a square short circuit will occur, which warns people. Then let's take a look at the processing technology of the water sensor wiring harness.
1. Due to the special nature of the wire material during cutting (composed of glass fiber, MRP105 insulating black, tinned copper composite braided polyester, polyester yarn woven), there must be no bending and dirty phenomena, use when cutting Special template, cut by hand, and fix both ends with 3M masking tape to prevent looseness, put them neatly, wrap them with dust-proof bags, and only leak both ends to facilitate back-end operations.
2. Use a pick pin to pick out the two strands of tinned copper bottom thread in the middle, trim off the rest, and do not cut the ground wire. After cutting, use an alcohol lamp to weave the scattered woven mesh polyester and polyester yarns at the end of the wire cleanly. The insulating black and glass fiber of MRP105 must not leak more than 1mm.
3. Before injection, use a white heat-shrinkable tube with Ø0.6mm to bake one end of the leaky core wire. The injection material must use PVC plug material 45P (shore 92A) white anti-ultraviolet (UV), and there should be no crushing during injection. Polyester yarn knitting, polyester yarn exposed, shrinkage and other phenomena. All dimensions must comply with customer drawings.
4. 100% short circuit continuity test.
5. According to IPC620 standard inspection.
KABLE-X Technology(Suzhou)Co., Ltd has been engaged in the production, processing and Custom Wiring Harness for 20 years. Facing the new challenge of the national dual-control policy, we believe that it will also be a new opportunity for KABLE-X Technology(Suzhou)Co., Ltd. We will deploy reasonably and work together to provide customers with high-quality wiring harness.